Job Description

Role Purpose

Plan, coordinate, and supervise the civil/structural scope for

G+3

residential and commercial projects in Sharjah. Deliver works

safely, on time, to spec, and within budget

, complying with

Sharjah Municipality

procedures,

Sharjah Civil Defense (SCD)

interfaces,

SEWA

utility requirements, company contracts (FIDIC-based), and UAE labor/HSE rules--while actively planning for

weather (heat, humidity, dust/fog)

and

traffic/permit constraints

that impact logistics and sequencing

Key Responsibilities1) Engineering & Planning

Translate IFC drawings/specifications into

method statements

,

ITPs

, and a rolling

2-6-week look-ahead

aligned to the master programme. Coordinate

shop drawings

, rebar BBS, builder's works for MEP/ELV, and SCD egress/plant-room interfaces; raise

RFIs

for conflicts. Identify

long-lead/critical

civil activities (elevator pits/shafts, waterproofing sequences, facade anchors, precast elements) and lock in approvals early.
2) Site Execution & Supervision

Lead daily supervision of

earthworks, foundations, concrete frames, masonry, plaster/screed, waterproofing, facade brackets, finishes, and external works

(roads, kerbs, interlocks, drainage). Release workfronts only after

setting-out verification

(lines/levels/tolerances) with Land Surveyor; conduct

pre-pour

and

post-pour

checks. Enforce hold/witness points per ITP and maintain a

first-time-right

culture to avoid rework.
3) Quality Assurance & Documentation

Ensure installation of

approved materials

only (MIR/MAR); coordinate WIRs with QA/QC and the Consultant. Close

NCRs

with quantified corrective actions; maintain redlines and

as-built

updates in step with execution. Keep up-to-date registers: concrete tests, compaction reports, waterproofing flood tests, pull-out tests, cube strength trends.
4) HSE & Temporary Works

Implement project HSE plan,

JHAs

, lift plans, formwork/shoring checks, edge protection, and hot-work permits. Enforce

MOHRE midday-break

and heat-stress controls; ensure safe access/egress and housekeeping. Review and approve

temporary works

method statements with Tech Office/3rd-party where required.
5) Weather & Traffic Planning (Sharjah)

Schedule

early-morning/night

pours and high-tolerance works to mitigate heat, refraction, and wind; specify

ice/chilled-water

concreting if in the spec. Monitor

temperature/RH/wind

for membranes, coatings, and sealants; use hygrometers and follow manufacturer limits. Coordinate with Logistics/Procurement for

off-peak deliveries

,

SRTA/Police permits

, alternate routes, and lay-down areas; maintain a

traffic calendar

(school peaks, events, Ramadan).
6) Commercial & Change Control

Track executed quantities vs. BOQ; support QS on measurements,

variation orders/claims

, and subcontractor RA bills. Drive waste reduction (concrete, rebar, blocks) and

productivity

monitoring; prepare recovery plans when needed.
7) Stakeholder & Interface Management

Chair daily briefings with foremen/subcontractors; lead weekly coordination with Planning/QAQC/MEP/Survey/Procurement. Interface professionally with

Consultant/Client

to secure timely approvals and close technical queries.
Category-3 Technical Scope (G+3 Focus)

Concrete works:

covers/tolerances, anchor bolts/embeds, openings, curing regimes, dimensional control.

Waterproofing:

substructure/retaining walls/roofs; detailing around penetrations; flood/adhesion tests.

Facade/Glazing:

bracket setting-out, thermal breaks, sealants, movement joints.

Masonry & Finishes:

plumbness/flatness, control joints, substrate preparation, tolerance checks.

External Works & Drainage:

invert levels, positive falls, manholes, backfilling/compaction, pavement layers, accessibility grades.

Temporary Works:

formwork/shoring/back-propping, crane bases, lifting points, backfill staging.
Core Deliverables

Approved

Method Statements & ITPs

for all civil packages. Rolling

look-ahead schedule

with manpower/equipment histograms.

Inspection packs

(pre-pour, rebar, formwork, waterproofing, finishes). Up-to-date

as-built

drawings and coordinated redlines.

Quality dossiers

(test results, WIR/MIR logs, calibration certificates).

HSE records

(JHAs, toolbox talks, incident close-outs).

Progress/productivity

reports and recovery plans.
Authority & Decision Rights

Release or

hold/reject

workfronts/materials based on compliance to drawings/specs/HSE. Initiate RFIs and propose

value engineering

(no scope erosion). Approve subcontractor method statements and WIRs within DOA; recommend changes impacting programme or cost.
Qualifications & Experience

BSc in

Civil Engineering

(or equivalent).

5-8+ years

UAE site experience, including

G+3

projects; Sharjah experience preferred. Working knowledge of Sharjah Municipality workflows,

SCD/SEWA

interfaces, FIDIC, and local HSE rules (incl. MOHRE midday-break). Proficient with

AutoCAD

, MS Project/Primavera basics, MS Office; BIM/CDE familiarity (Aconex/Procore) is a plus. Valid UAE driving license preferred;

English

required (Arabic an advantage).
Skills & Competencies

Detail-driven, methodical, and

first-time-right

mindset. Strong coordination across trades; decisive problem solving and clear

RFI

writing. Planning around

heat, humidity, dust/fog

, and urban

traffic constraints

. Clear written/oral communication and documentation discipline. Team leadership of foremen/work crews; firm but fair subcontractor management.
KPIs

Schedule adherence

on civil critical path activities (baseline/recovery).

First-pass WIR acceptance ? 90%

;

rework

within target.

Quality:

NCRs closed within SLA; zero repeat NCRs on same root cause.

HSE:

zero lost-time incidents on civil scope; JHA/toolbox compliance ? 98%.

Cost & waste:

variance within target; material wastage below benchmark.

Documentation:

RFIs turnaround within SLA; as-builts current at all times.
Indicative Tolerances (use project specs/ITPs as final)

Structural grid set-out:

5 mm

; anchor bolts/embeds:

3-5 mm

. Slab FFL local level:

5 mm

; slope tolerance per design. Masonry wall alignment/plumb:

5 mm

in 3 m. Drainage inverts:

10 mm

; external levels:

5-10 mm

vertical.
HSE & Working Conditions

Outdoor/site environment with

heat, dust, noise

; strict

PPE

.

Night/early-morning

pours and inspections as required; occasional weekends/holidays. Work at height/edge protection; lifting operations near cranes; live-traffic precautions at site boundaries.
Job Type: Full-time

Pay: AED2,500.00 - AED3,000.00 per month