Job Description

The Taleb Group in Doha, Qatar is now hiring for Calibration Technician positions.

Requirements: - Have experience in the calibration field minimum 3 years ( Oven- Weight balance - weighing Bridge - Length - Batching plant RM Load cells - Feller Guage -Have a Diploma in Metrology or any relevant qualifications

Salary: QAR 1800-2000 based on qualification and experience.

Responsibility: - To receive the instruments for calibration from the customers. - To check the physical condition of instruments as well as functioning of instrument. - To verify the qty. and type of instruments received against customer delivery note / memo, if any. - To prepare Calibration Service Request cum Instrument Receipt Challan - To issue copy of Calibration service request cum instrument receipt challan to the customer for acknowledgement of receipt of their instruments. - To paste masking tape on instrument along with the details of; Calibration service request (inward) No. (Job No.) / Serial no. of particular instrument in the inward. - To place the instruments at the identified area such as "Instrument received for CalibrationaEUR. - To clean the instruments before calibration. - To clean the instruments with petrol and cotton waste in case of mechanical instruments. - To keep instrument in the calibration standard room atleast for 30 minutes for soaking (To bring instrument in the equilibrium condition of the standard room). - To start calibration of instruments as per the documented calibration method based on the priority of the calibration. - To ensure that the calibration methods are available where calibration activities are performed. - To record the results of calibration in the observation sheet. - To complete the calibration and to get review and approval of results recorded in the observation sheet from the Technical Manager. - To calculate uncertainty of measurement for the instruments calibrated as requested by the customer. - To enter the data of the observation sheet in the computer and prepare calibration certificate. - To get review and approval of the calibration certificate through Technical Manager / Chief Executive Officer. - To collect photocopies of masters calibration certificate used for the performing of calibration. - To attach photocopies of calibration certificates of master alongwith the calibration certificates and to place all such things in the cover. - To place instrument at the identified place in the calibration room after completion of calibration. - To deliver the instruments alongwith the calibration certificate to the customer. - To ensure that the proper records are maintained at all stages of calibration and quality assurance activities. - To prepare daily records of the mechanical / electrical / thermal discipline. - To handle the instruments throughout the calibration activities in safe and proper manner. - To monitor the accommodation and environment parameters (Such as Temperature, humidity, noise, illumination, electrical supply, earthing resistance) regularly and to maintain records for the same. - To analyse the relevant records and to provide feedback to the Technical Manager against the customer complaint, if any. - To do re-calibration of the instruments as per the Quality assurance schedule. - To do calibration of the instrument selected for the inter laboratory comparison and to submit the results of calibration to the Technical Manager. - To prepare uncertainty budget for all calibration parameters and to ensure that the same is used periodically for uncertainty of measurement. - To identify the requirements for consumable purchase and forward it to Technical Manager. - To help Technical Manager on day to day activities. - To report to the Technical Manager on day to day functioning. - To use available resources in an optimum basis. - To reduce wastage of available resources.

Authority: - To stop the calibration activities, if proper environment condition is not maintained/achieved. - To take corrective and preventive actions identified based on analysis, related to the customer complaint or results of calibration.

Application: Interested Candidates should send their latest Resume/CV with their working history and Education