Corrosion Engineer
Abu Dhabi, United Arab Emirates
Job Description
Velosi is always looking for talented people to become its team members. We realize that productive people are always a good addition to our organization. So if you have the financial acumen and the passion to work with some of the biggest companies in the world, join in!
Job Type: Full-time, Permanent
Project Location(s): Abu Dhabi, United Arab Emirates
Education: Bachelor or higher degree in Mechanical/Chemical/Metallurgical Engineering or equivalent
- Compliance to Company Inspection & Corrosion control manual and all HSE and other company policies in line of work.
- Carry out assigned Corrosion management activities pertaining to static equipment in Process unit or offsite facility.
- Exhibit proficiency in accurate application of codes, standards and procedures pertaining to
- Corrosion monitoring, mitigation and material degradation mechanism.
- API 571 orNACE certification relevant to corrosion management of static equipment is mandatory.
- Support Risk Based Inspection development activities in co-ordination with RBI team pertaining to degradation mechanism, corrosion loop and predicted corrosion rates.
- Participate in RBI workshops and provide feedback as required.
- Implement and monitor IOWs pertaining to potential corrosion mechanism.
- Liase with other functions like Inspection, process, Operations and Maintenance for implementation of recommendations and for activities pertaining to process unit degradation troubleshooting, IOW Implementation etc.
- Highlight material degradation related and static equipment integrity issues as per authorized
- Channels within company technical authority system and Operational support team meetings as Directed by Corrosion & Metallurgy Team leader.
- Ensure compliance to HSECES requirements like schedule compliance, performance standards Verification and documentation.
- Ensure Equipment history pertaining to corrosion is maintained and available.
- Thorough knowledge and experience in working with Inspection management system on behalf of Client is mandatory.
- Ensure routing of corrosion records for review of appropriate technical authority levels defined in Company Inspection management system and ensure completion of review process.
- Support Operations and process in activities pertaining to chemical cleaning, Integrity chemical Management, monitoring during plant trial runs and implementation of new / alternate chemicals.
- Assess and provide independent feedback ensuring asset integrity. Intervene as required based on Potential degradation scenarios.
- Carry out corrosion analytics based on available Inspection and NDT records and maintain current Plant degradation and risk status.
- Apply knowledge of unit processes and flow conditions in Monitoring equipment degradation.
- Lead Failure analysis and support Root cause analysis activities pertaining to material degradation of Static equipment’s. Support RCA team pertaining to material degradation of components in the
- Provide technical advice to Plant Operations Division as required, to ensure compliance with
- accepted Company standards.
- Draws the attention of the Management concerned to any failure to comply with such standards.
- Review all new and modification development work to advice on construction standards, material
- selection and testing requirements in line with company and international standards. Consult
- Inspection, NDT and QA AC SME as required.
- Support project team in review of project corrosion control, corrosion risk assessment, material Selection and corrosion strategy documents. Review and comment on the key project documents
- Ensuring compliance to company standards and best practices.
- Safeguard own Health and Safety, as well as that of the fellow employees, by paying attention to safe Work practices, maintaining a safe work environment and complying with applicable HSE Requirements.
- Take action to INTERVENE and STOP any un-safe activity or non-compliance with HSE
- Requirements, if witnessed, and report the incident – regardless of your position or that of the Transgressor
- The Corrosion Engineer shall have minimum 7 years’ experience working as a client corrosion Engineer or on behalf of client directly for Operating process unit for Refinery/petrochemical. Good
- Understanding of Inspection practices, Process and Corrosion mechanism is mandatory.
- Graduation in Mechanical, Metallurgy, Chemical Engineering or equivalent is mandatory.
- Good working Knowledge on CMMS and IMS systems are mandatory.
- Knowledge on corrosion and process Simulation tools is preferred.
As our ideal candidate, you should have:
- Bachelor or higher degree in Mechanical/ Chemical/ Metallurgical Engineering or equivalent
- At least 07-10 years of refinery experience including 5-6 years in the Corrosion section.
- Should have Good experience in the Refinery.
- Certification of the API-571 or NACE will be mandatory
- Ability to work collaboratively in a team environment.
- Ability to communicate complex ideas effectively – both verbally and in writing – in English.
- Proven record of leadership in a work setting and/or through extracurricular activities.
- Outstanding record of academic achievement.
- Ability to work effectively with people at all levels in an organization.
- Excellent analytical and quantitative problem-solving skills.
Beware of fraud agents! do not pay money to get a job
MNCJobsGulf.com will not be responsible for any payment made to a third-party. All Terms of Use are applicable.
Related Jobs
Job Detail
-
Job IdJD1447093
-
IndustryNot mentioned
-
Total Positions1
-
Job Type:Full Time
-
Salary:Not mentioned
-
Employment StatusPermanent
-
Job LocationAbu Dhabi, United Arab Emirates
-
EducationNot mentioned