Electrical Industries Company (EIC)

Current Openings : 34

 

 

 

Become a Member

Click on Login if you are already member.

Register Login
Current Jobs in Electrical Industries Company (EIC)
Jobs 34
Apply Now
19 Aug 2019

r 1. Performs routine visual and mechanical inspection of components, stage inspections of assemblies and subassemblies 2. Verification of drawings with actual produced components, panels. Must possess ability to read mechanical drawings, decide on sampling rates of component inspection, guiding…

Apply Now
22 Aug 2019

r We are looking for Senior Service Technician for Saudi Arabia. Responsibilities: 1.Testing of all electrical equipment such as MV/LV switchgears components (breakers, CT’S, PT’s , Auxiliary relays and Functional) 2.Testing of MV/LV MCC equipments components such as contactor, CT’s…

Apply Now
09 Aug 2019

r 1. Performs Electrical high voltage test / Partial Discharge for GIS & HV / EHV cable systems up to 600kV.2. Have knowledge and familiarize in different equipment in testing and its operation and connection. 3. Can perform the fault…

Apply Now
22 Aug 2019

r We are looking for Senior Automation & Control Technician for Saudi Arabia.Experience Required:Technical Expertise and Direct work experience of min. 5 years in the execution field related to: (1) Power System Protection covering Testing of Protection, Control & Metering…

Apply Now
21 Aug 2019

r 1. Prepare Mechanical drawings, procedures and Bill of Materials to achieve maximum efficiency & continuously monitor and support to ensure schedules are met and procedures are followed. 2. Prepare mechanical design drawings related to existing product range, design enhancements,…

Apply Now
23 Aug 2019

r 1. Review customer requirements and specifications and do the Engineering work for assigned jobs, which would include but not limited to equipment layout drawings, BOM, three line diagrams, section views, and design calculations as per agreed timelines. 2. Prepare…

Apply Now
25 Aug 2019

r 1. Prepare Mechanical drawings, procedures and Bill of Materials to achieve maximum efficiency & continuously monitor and support to ensure schedules are met and procedures are followed. 2. Prepare mechanical design drawings related to existing product range, design enhancements,…

Apply Now
20 Aug 2019

r We are looking for Automation & Control Engineer for Saudi Arabia.Experience Required:Technical Expertise and Direct work experience of min. 3 years in the Design & Testing field related to: (1) Power System Protection covering Configuration & Testing of Protection,…

Apply Now
03 Nov 2018

r We are looking for Service Engineer for Saudi Arabia.Responsibilities:1. Preparation of test procedure with in his limit as requested by the supervisor For HV / EHV & Advance Protection Relays2. Testing of all type of protective relays and associated…

Apply Now
20 Aug 2019

r We are looking for Automation & Control Engineer for Saudi Arabia.Experience Required:Technical Expertise and Direct work experience of min. 3 years in the Design & Testing field related to:(1) Power System Protection covering Configuration & Testing of Protection, Control…

Apply Now
25 Aug 2019

r We are looking for Senior Automation & Control Engineer for Saudi ArabiaExperience Required:Technical Expertise and Direct work experience of min. 6 years in the Design & Testing field related to:(1) Power System Protection covering Configuration & Testing of Protection,…

Apply Now
23 Aug 2019

r We are looking for Senior Automation & Control Technician for Saudi Arabia.Experience Required:Technical Expertise and Direct work experience of min. 5 years in the execution field related to:(1) Power System Protection covering Testing of Protection, Control & Metering IEDs.…

Apply Now
24 Aug 2019

Request and review all required information for preparing monthly financial reports. Prepare inhouse financial reports on monthly basis. Prepare Financial Management Reports. Prepare Present view report. Assist in preparation of feasibility study calculation financial analysis for new investments. Assist in…

Accountant
Electrical Industries Company (EIC)  -  Dammam, Saudi Arabia
Apply Now
25 Aug 2019

Reponsible for the Letter of Credit opening, amendment and solving issues Responsible for Debit Notes Responsible for Bank reconciliation, internal transfers Responsible for drafts payable Liability creation, D/P Settlement. Responsible for petty cash entry Responsible for MaterialInTransit D/P Minimum 5…

Apply Now
25 Aug 2019

Reporting to: Chief Design Engineer / Design ManagerMain responsibilities: Preparation of Distribution/Power Transformer Design BOM Checking of manufacturing drawings tender / technical submittals, clarifications with customers / sales on tenders / technical submittals, etc. University Qualifications: BS/BE/BTech Electrical / Electronics…

Apply Now
24 Aug 2019

Reporting to: Design EngineerMain responsibilities: The incumbent is responsible in the preparation of transformer design drawings The incumbent is responsible in the preparation of PDI Files The incumbent is responsible in checking of design drawings The incumbent is responsible in…

Apply Now
19 Aug 2019

1. Preparation of test procedures.2. Testing of all type of protective relays and associated components3. Testing of HV/MV/LV Switchgears, Motor Control Center, GIS and Generators4. Coordinate with customers and endusers at site for work schedule.5. Communicate with Services Supervisor for…

Apply Now
22 Aug 2019

1. Preparation of test procedure within his limit as requested by the supervisor.2. Testing of all type of protective relays and associated components except line and distance protection.3. Testing of MV/LV Switchgear, Motor Control Center and Transformers4. Coordinate with customer…

Apply Now
21 Aug 2019

1. Conducting inspections and repairs at site based on customer complaints.2. Conducting inspections of repaired Transformer units.3. Preparing aftersales reports and maintaining documents.4. Maintaining aftersales services vehicles and tools.5. Calibration of instruments used for aftersales service.6. Comply with ISO/QMS requirements.…

Apply Now
23 Aug 2019

1. Inprocess inspections and conducting relevant test at various stages.2. Identifying nonconformance3. Maintaining Quality Documents, Records, PDI, Checklists Deviation Request, etc.4. Conducting ProtoEvaluation5. Conducting Functional tests, Physical Inspection, and Dispatch Inspections related to concerned area.6. Comply with ISO/QMS requirements. Minimum…

Apply Now
17 Aug 2019

1. Conducting QA/QC activities including Routine and Factory Acceptance Tests of Switchgear Products such as MV/LV Switchgear Control Gear, Protective Relay Control Panel, etc. 2. Programming, configuring and testing of IEDs Relays, meters, IED Communication and Device configuration. Minimum 3…

Apply Now
23 Aug 2019

Testing and commercial activities related to Power System Protection, Automation Control including SCADA/RTU/Power Monitoring System/PLC like Automation Project Estimation, Engineering Design, Protection / Control IEDs Network configuration, interfacing, HMI System Integration, Testing Commissioning including FAT / iFAT SAT, troubleshooting, preparation…

Apply Now
25 Aug 2019

Preparation of project schedules and arrange internal meeting with various departments, when necessary.Submittal of Technocommercial comment, PO acknowledgment letter, ITP to customers.Preparation of initial work plan, monthly billing report, and submit it to Engineering and Production.Serves as a single point…

Apply Now
14 Aug 2019

Secure RFQ/ inquiries from clients.Followup with Sales Support Engineers to submit technocommercial offer on time.Followup with customer for securing purchase order.Obtain Pre/Post Bid information regarding price competition, etc.Prepare and update sales followup reportsCommunicate with Marketing Team/Customer for RFQs and prospective…

Apply Now
21 Aug 2019

Review customer requirements and specifications, and do the engineering work for necessary assigned job, which would include but not limited to equipment layout drawings, necessary bill of materials, three line diagrams and section views, and design calculation.Produce material requisition Capable…

Apply Now
24 Aug 2019

1. Preparation of test procedures.2. Testing of all type of protective relays and associated components3. Testing of HV/MV/LV Switchgears, Motor Control Center, GIS and Generators4. Coordinate with customers and endusers at site for work schedule.5. Communicate with Services Supervisor for…

Apply Now
11 Aug 2019

1. Preparation of test procedure within his limit as requested by the supervisor.2. Testing of all type of protective relays and associated components except line and distance protection.3. Testing of MV/LV Switchgear, Motor Control Center and Transformers4. Coordinate with customer…

Apply Now
14 Aug 2019

1. Conducting inspections and repairs at site based on customer complaints.2. Conducting inspections of repaired Transformer units.3. Preparing aftersales reports and maintaining documents.4. Maintaining aftersales services vehicles and tools.5. Calibration of instruments used for aftersales service.6. Comply with ISO/QMS requirements.…

Apply Now
15 Aug 2019

1. Inprocess inspections and conducting relevant test at various stages.2. Identifying nonconformance3. Maintaining Quality Documents, Records, PDI, Checklists Deviation Request, etc.4. Conducting ProtoEvaluation5. Conducting Functional tests, Physical Inspection, and Dispatch Inspections related to concerned area.6. Comply with ISO/QMS requirements. Minimum…

Apply Now
22 Aug 2019

1. Conducting QA/QC activities including Routine and Factory Acceptance Tests of Switchgear Products such as MV/LV Switchgear Control Gear, Protective Relay Control Panel, etc. 2. Programming, configuring and testing of IEDs Relays, meters, IED Communication and Device configuration. Minimum 3…

Apply Now
23 Aug 2019

Testing and commercial activities related to Power System Protection, Automation Control including SCADA/RTU/Power Monitoring System/PLC like Automation Project Estimation, Engineering Design, Protection / Control IEDs Network configuration, interfacing, HMI System Integration, Testing Commissioning including FAT / iFAT SAT, troubleshooting, preparation…

Apply Now
17 Aug 2019

Preparation of project schedules and arrange internal meeting with various departments, when necessary.Submittal of Technocommercial comment, PO acknowledgment letter, ITP to customers.Preparation of initial work plan, monthly billing report, and submit it to Engineering and Production.Serves as a single point…

Apply Now
20 Aug 2019

Secure RFQ/ inquiries from clients.Followup with Sales Support Engineers to submit technocommercial offer on time.Followup with customer for securing purchase order.Obtain Pre/Post Bid information regarding price competition, etc.Prepare and update sales followup reportsCommunicate with Marketing Team/Customer for RFQs and prospective…

Apply Now
18 Aug 2019

Review customer requirements and specifications, and do the engineering work for necessary assigned job, which would include but not limited to equipment layout drawings, necessary bill of materials, three line diagrams and section views, and design calculation.Produce material requisition Capable…